Modified Bitumen Adhesive is a professional grade cold applied, superior bonding strength polymer modified asphalt adhesive that provides excellent adhesion and elongation properties with unsurpassed resiliency and durability. Ideal for applying SBS modified bitumen sheets, applying glass base ply's, as a lap cement, or as an extremely high quality roof adhesive. Meets and exceeds all the requirements of ASTM D 3019, Type-1. Miami-Dade NOA.
Cold-Process Lap Cement is a high grade, fibered, asphalt solvent blend of medium brushing consistency that is recommended as a lap cement, adhesive for use with rolled roofing membranes, and blind-nailing overlap applications. Minimizes the risk of wrinkles, blisters and other problems. May also be used for bonding gravel or granule surfacing for built-up roofing systems. Application rate will vary. Meets and exceeds all the requirements of ASTM D3019, Type-3. Miami-Dade NOA.
A highly engineered acrylic single-component, water-based primer designed for application over BUR, Mod-Bit, and smooth or mineral surfaced cap sheet. #996 is designed specifically to prevent asphalt bleed-through when applying Silicone coating systems over all asphalt substrates. #996 requires no inter-mixing and delivers fast-dry performance.
#995 A/B 2-PART EPOXY PRIMER is a two component, 1 to 1 ratio, water-based multipurpose, thixotropic, easy spreading epoxy primer. It adheres well to most metals, organic polymers, wood, masonry and vitreous surfaces. This primer may also be used as masonry block filler. Do not use on copper or silver.
Solvent- based bond coat and penetrating sealer for priming most surfaces prior to application of cold applied or hot mopped asphalt coatings, roof cements, adhesives, asphalt damp proofing and waterproofing. Not recommended as a stand-alone roof coating. Meets ASTM D 41, FED SPEC SS-A-701, Miami-Dade NOA.
Fast-Drying Solvent- based bond coat and penetrating sealer for priming most surfaces prior to application of cold applied or hot mopped asphalt coatings, roof cements, adhesives, asphalt damp proofing and waterproofing. Not recommended as a stand-alone roof coating. Meets ASTM D 41, FED SPEC SS-A-701.
A professional grade, environmentally-friendly water-based primer designed for use on rusted metal surfaces. To be used when applying Eternalastic product to any structural metal surface. Promotes coating adhesion and is easily applied with roller or airless sprayer
A water based, easily applied product that was developed to help ensure superior finish coating adhesion. To be used when applying any Eternalastic product to structural concrete surfaces. Will absorb into the concrete thus preparing the surface for maximum performance and adhesion. All #911 Eternalastic coatings on concrete must first be primed with #970.
A rinseable, low viscosity, spray- able liquid used as a pre-treatment of EPDM rubber roofing and Single-Ply membrane prior to power washing and application of Eternalastic coating. The unique chemistry is designed for use with Eternalastic and EternaSil coatings. Pre- treatment with #990 Eternalastic EPDM Primer significantly improves the adhesion of the topcoat to the EPDM rubber membrane.
#9900 Eterna-Sil TPO Primer is intended to be used over aged/existing TPO membranes. #9900 is a green, very thin, watery-like fluid that should be applied only by brush. The coverage rate for this product is intended to be a minimum of 800 ft2 per gallon or 8 squares per gallon. Total wet film application is only 2 wet mils maximum. Spread the product across the substrate until a greenish sheen is no longer visible. The product should dry clear with an undetected or very subtle green tint if installed correctly. Achieving a thinner coverage rate for this product is better for adhesion. This product dries very quickly as it is mostly solvent.
Asphalt Roof Re-Saturant is a carefully prepared blend of selected asphalt, mineral fillers and penetrating oils that soak into the existing asphalt roof system to revitalize and help restore the old roof. Forms a continuous durable seal resistant to cracking and splitting under most conditions. Meets ASTM D 4479. Miami-Dade NOA Compliant.
Corporate Headquarters
1818 SW 31st Ave
Hallandale, FL 33009
800-535-6947
