#508 WET SURFACE MODIFIED MASTIC

Surface must be free from rust or any other foreign matter that would interfere with a good bond. Remove rust with a wire brush. For best results in cold weather, store at room temperature for 24 hours prior to application.

Use a trowel, putty knife or gloved hand to repair cracks, tears, holes, and breaks by applying cement 1/8” to 1/4” thick. Apply and work cement into break or crack, then apply cement 2”–4” beyond the problem area feathering the edges. If problem area is over 1/4” wide or 2” long embed glass fabric to reinforce cement then cover with additional cement.

Approximate coverage is 12 square feet per gallon.Apply at a minimum rate of 40 linear ft.per gallon with 4” wide 1/8” thick application.

DO NOT ALLOW TO FREEZE. DO NOT THIN. DO NOT HEAT CONTAINER or store at temperatures greater than 120°F. Be sure the lid is tight and the pail is secured when transporting this product. Do not allow pail to tumble as this may loosen the lid and allow leakage or spillage to occur

Clean tools with mineral spirits or paint thinner.