#996 ETERNA-SIL PREMIUM BLEED BLOCKER

• Single Component Asphalt Bleed Blocker
• Low VOC
• Fast Dry
• Excellent Adhesion
• No Inter-mixing Required

#996 should not be applied to wet, dusty, oily, mildewed, heavily chalked, blistered or otherwise structurally unsound surfaces. Do not apply #996 over Silicone.

All surfaces to be coated must be clean, dry, and paintable. It may be necessary to power wash enhance adhesion. See application specification for more details.

#996 can be applied by brush, roller or spray

For ideal drying conditions, apply on warm, sunny days, preferably in the morning hours to provide maximum dry time. #996 can be applied to a dry or slightly damp, but not wet, surface. Water must be swept out of all puddles prior to application of #996. Stir thoroughly before application to achieve a uniform consistency. Apply with a brush, heavy-duty paint roller or heavy-duty spray equipment. Under normal conditions, #996 will dry in 4 – 6 hours. Relative humidity and temperature will directly affect drying time. Avoid over application.

Apply at a rate of 1.5- 2.0 gallon per 100 sq. feet per coat dependent upon roof porosity.

DO NOT APPLY IF TEMPERATURE IS BELOW 50° F OR ABOVE 110°F. DO NOT APPLY IF THERE IS A THREAT OF RAIN OR DEW WITHIN 48–72 HOURS. DO NOT ALLOW TO FREEZE. DO NOT THIN. DO NOT HEAT CONTAINER or store at temperatures greater than 120°F. Be sure the lid is tight and the pail is secured when transporting this product. Do not allow pail to tumble as this may loosen the lid and allow leakage or spillage to occur.

Clean wet coating from hands and tools with soap and water. Dried coating on tools can be cleaned with mineral spirits or paint thinner.

Available in 5-gallon pails and 55-gallon drums.

D.O.T. Classification: Roof Coating, Not Regulated NFMC #170080